 |
 |
 |
||||||
 |
 |
Success in today’s highly competitive building management business depends upon high tenant occupancy, controlled expenses, and trouble free operation. That means no unexpected shutdowns, no major equipment and service failures, and no high cost emergency repairs.Here you will find valuable and detailed information covering a variety of nondestructive or NDT inspection programs - including ultrasonic pipe and tank testing, infrared electrical inspection, vibration analysis, advanced corrosion monitoring, and other diagnostic services of interest to building owners, building operators, HVAC engineers, and engineering consultants.We also offer technical bulletins on a variety of HVAC subjects, case histories of past work experiences, reference links to other technical resources, and other HVAC related information. All inquiries are welcome. |
Pipe Testing - Main Page
Pipe Testing Overview
Pipe Testing Sample Report
Pipe Testing Specifications
Piping Trends
Tank Testing - Main Page
Tank Testing Overview
Tank Testing Sample Report
Tank Testing Specifications
Advanced Corrosion Monitoring - Main Page
Advanced Corrosion Monitoring Overview
Advanced Corrosion Monitoring Sample Report
Advanced Corrosion Monitoring Specifications
Infrared Electrical Testing - Main Page
Infrared Electrical Testing Overview
Infrared Electrical Testing Sample Report
Infrared Electrical Testing Specifications
Vibration Analysis - Main Page
Vibration Testing Overview
Vibration Testing Sample Report
Vibration Testing Specifications
Steam Trap Testing - Main Report
Steam Trap Testing Overview
Steam Trap Testing Sample Report
Steam Trap Testing Specifications
Bulletin # P-01 -- |
Evaluating Building Piping Systems For Corrosion, Pitting and Remaining Service Life |
|
Bulletin # P-02 -- |
Why You Cannot Not Use Schedule 40 Threaded Black Pipe In Condenser Water Applications |
|
Bulletin # P-03 -- |
Identifying Potential Pipe Weakness Without Cutting Out Pipe |
|
Bulletin # P-04 -- |
An Introduction To Ultrasonic Pipe Testing Through A Free Pipe Sample Analysis |
|
Bulletin # P-05 -- |
Total Piping Corrosion Protection During Winter Lay-up Or Extended Drain Down |
|
Bulletin # P-06 -- |
Identifying Pipe Condition/Defects Through Advanced Metallurgical Analysis * |
|
Bulletin # P-07 -- |
Clamp Type Pipe Construction --- Making Sure Your Pipe Service Life Is Not Cut In Half During Installation |
|
Bulletin # P-08 -- |
Plate And Frame Heat Exchangers --- The Ultimate Safeguard For Critical Or Problem Condenser Water Applications |
|
Bulletin # P-09 -- |
Recognizing The Hidden Threat To Every Chill Or Cold Water Piping System |
|
Bulletin # P-10 -- |
Avoiding Some Obvious But Surprisingly Common Roof Level Condenser Piping Failures |
|
Bulletin # P-11 -- |
The Virtual Impossibility Of Maintaining A Clean Condenser Water System Using A Standard Water Treatment Program Alone* |
|
Bulletin # P-12 -- |
The Pros And Cons Of Destructive vs. Nondestructive Pipe Testing |
|
Bulletin # P-13 -- |
Changes In Piping Trends Which Have Occurred Over The Past Few Decades |
Return To
Frames
Testing
Services Technical
Bulletins Case
Histories Specialty
Products Recommended
Links Mailing
List About
ECI Contact
Us